2-11.CLEANING PROCEDURE OF OLPF
<Preparation> Make it to Cleaning Mode of Power On/Set Up Menu by using the AC power supply. (It comes to Mirror Up/Shutter Open) Note: Use the AC power supply absolutely. <Cleaning Method> 1. Soak a small amount of EE3310 (Liquid cleaner) after wrapping the cleaning cloth (J-6082-636-A) around the cleaning jig (J-6082-635-A).
Cut Cleaning Cloth (J-6082-636-A) EE3310
Cleaning Jig (J-6082-635-A)
2. Surface of OLPF is cleaned. (Note that there is no wipe irregularity) 3. Power off. (It comes to Shutter Close/Mirror Down) Note: The cleaning of the OLPF must use a specified jig. If the specified jig is not used, the low pass filter might be damaged.
OLPF
DSLR-A350_L2 2-23
