|
|
|
Kto jest w sklepie?
Sklep przegląda 5885 gości i
21 zarejestrowanych klientów |
|
Kategorie
|
|
Informacje
|
|
Polecamy
|
|
|
 |
|
|
Dla tego produktu nie napisano jeszcze recenzji!
Using Your Remote
If Your Four-Digit Code is not in the Tables (Scanning)
If you try to program your remote control using the four-digit codes, and the remote control does not work correctly, you may be able to find a code that works by using the "scanning" process. 1. 2. 3. Turn on the TV. Press the TV key for at least three seconds�until the LED blinks. The following steps explain how to "scan" through the TV codes stored in your remote control using the keys. (The LED will not be lit while the keys are depressed. While pointing the remote control at your TV, press the5key to scan upward to the next code. (Use the6key to return to the previous code.) If the transmitted code is the correct one, your TV will turn off, responding as if its POWER key were pressed. If your TV does not respond, depress the5key to try the next code. When your TV turns on or off as a result of the transmitted code, you will know that you have found the correct code. When you have found the correct code (power to your TV is toggled on or off), press the ENTER key. This will store the manufacturer�s code. The LED will then flash rapidly several times and turn off.
-
NOTE: If your TV is not listed in the tables and/or the codes for your brand are not accepted by the remote, you will need to use the remote originally manufactured for your unit.
Programming the Master Power Feature
If you wish to control the power on/off function of your receiver and TVwith a single press of the POWER key on your remote control, you can enable the remote control�s Master Power feature by following these steps: � � Press the SAT key on the remote control for at least three seconds�until the light on the key blinks. Press the POWER key on the remote. The light will remain on steady. Press the power key a second time, and the light on the remote will blink on and off briefly, which indicates that the remote has accepted the Master Power command. If you wish to cancel the Master Power feature, just repeat the steps outlined above.
�
DSR205 User Guide
v
v
13
|
|
|
> |
|
