Trouble check
Picture
Symptom
While editing using the DV connecting cable, recording picture cannot be monitored.
Cause and/or corrective actions
� Remove the DV connecting cable, and connect it again.
Others
Symptom
The camcorder becomes warm. The supplied Remote Commander does not work.
Cause and/or corrective actions
� If the power of the cammcorder is on for a long time, it becomes warm, which is not mulfunction. � COMMANDER is set to OFF in the menu system. m Set it to VTR4 or ID. (p. 12) � Something is blocking the infrared rays. m Remove the obstacle. � The battery is not inserted with the correct polarity. m Insert the battery with the correct polarity. (p. 12) � The batteries are dead. m Insert new ones. (p. 12) � The camcorder is not malfunctioning.
The CHARGE lamp flashes after you charge the battery pack installed in the camcorder. No function works though the power is on.
� Disconnect the connection plug on the battery pack or on the AC power adaptor, then reconnect it in about 1 minute. Turn the power on. If the functions still do not work, press the RESET button on the back of the cassette compatment lid using a sharp-pointed object. (If you press the RESET button, all the settings including the date and time return to the default.) (p. 8)
AC power adaptor
Symptom
The VTR/CAMERA or CHARGE lamp does not light. The CHARGE lamp flashes.
Corrective actions
� Disconnect the power cord. After about 1 minute, reconnect the power cord. (p. 17) � See the chart on the next page.
