INTEGRA DTR7.1
Instrukcja Obsługi

Programming the commands of remote controllers for other devices into the remote controller
Erasing the programmed command from one button
You can only erase memorized commands and not preset ones.

SEND/LEARN indicator

MODE buttons

1. Press and hold down the desired MODE button for the command, press the ENT button, and then release both buttons.
When you press the MODE button, the SEND/LEARN indicator lights and that mode appears in the display. When you press the ENT button, the lamp turns off. When you release the buttons, the lamp lights again and �LEARN� appears in the display.

AUDIO TRACK DISC

MUTING

REC

OPEN/COLSE

2. Press and release the button for the command you wish to erase.
When you press the button, the SEND/LEARN indicator turns off and �RCV� appears in the display. When you release the button, the lamp lights again.

DVD

CD

T1

T2

TUN

PH

V1 STEREO

V2

V3 DSP

V�

DIRECT

3. Press and release the same button again.
The SEND/LEARN lamp flashes twice slowly and �CLEAR� appears in the display. The memorized command is erased.
ENT

1
SURROUND

2
THX

3
DSP

4
Re-EQ

5
CH SEL

6
LEVEL +

7
LATE NIGHT

8
DIMMER

9
LEVEL �

+ 10

0

ENT

HOME THEATER CONTROLLER

RC-418M

Note: If no button is pressed for more than 30 seconds during the programming, the SEND/LEARN indicator flashes three times quickly, �ERROR� appears in the display, and the remote controller exits the programming mode. Resume from Step 1.

Erasing all the commands programmed under a MODE button
SEND/LEARN indicator

1. Press and hold down the desired MODE button, press the ENT button twice, and then release both buttons.

MODE buttons

When you press the MODE button, the SEND/LEARN indicator lights and that mode appears in the display. When you press the ENT button, the lamp turns off. When you release the buttons, the lamp flashes twice slowly and then lights again.

AUDIO TRACK DISC

MUTING

2. Press and release the same MODE button again.
When you release the button, the SEND/LEARN indicator flashes twice slowly. This erases all the commands memorized to the MODE button. Notes: � If no button is pressed for more than 30 seconds during the programming, the SEND/LEARN indicator flashes three times quickly and the remote controller exits the programming mode. Resume from Step 1.
ENT

REC

OPEN/COLSE

DVD

CD

T1

T2

TUN

PH

V1 STEREO

V2

V3 DSP

V�

DIRECT

1
SURROUND

2
THX

3
DSP

4
Re-EQ

5
CH SEL

6
LEVEL +

7
LATE NIGHT

8
DIMMER

9
LEVEL �

+ 10

0

ENT

� If you perform an invalid operation during programming, the SEND/LEARN indicator flashes three times quickly, �ERROR� appears in the display, and the remote controller exits the programming mode. Resume from Step 1. � If many commands have been programmed to the MODE button, then the SEND/LEARN indicator may remain lit for some time during Step 2. This is not a malfunction.

HOME THEATER CONTROLLER

RC-418M

63