WHIRLPOOL DU8300XT2
Instrukcja Obsługi

Before starting your dishwasher
1. Read �Important Safety Instructions� on page 2 before starting your dishwasher. 2. Spin the Upper and Lower Spray Arms to make sure nothing will stop them from turning freely. 3. Push door firmly when closing and it will automatically latch. 4. Run hot water at sink nearest dishwasher until it is hot. Turn it off

CYCLE SELECTOR BUTTON

1. OPTION SELECTOR BUTTONS

Starting your dishwasher
POTS & PANS cycle...
1. Turn Cycle Control Knob clockwise to dot marked POTS 81PANS. [POTS & PANS and NORMAL WASH Cycles share the same spot on the dial. The Selector Buttons determine which cycle operates.] The dishwasher will automatically start. 2. Push the POTS & PANS Selector Button only. (The HEAT DRY option is preset. The AIR DRY option can not be selected.)

NORMAL WASH cycle...
1. Turn Cycle Control Knob clockwise to dot marked NORMAL. (NORMAL WASH and POTS & PANS Cycles share the same spot on the dial. The Selector Buttons determine which cycle operates.) The dishwasher will automatically start. 2. Push the HEAT DRY or AIR DRY Selector Button.

LIGHT WASH cycle...
1. Turn Cycle Control Knob clockwise marked LIGHT WASH. The dishwasher tomatically start. 2. Push the HEAT DRY or AIR DRY Selector to dot will auButton.

RINSE & HOLD cycle...
1. Turn Cycle Control Knob clockwise to dot marked RINSE & HOLD. The dishwasher will automatically start. 2. Push the AIR DRY Selector Button only.

Selecting

a cycle

POTS & PANS Cycle
Maximum cleaning for cookedor baked-on foods. Timer delays while the dishwasher automatically heats the water to 145 F (63 C] in both washes and the last rinse [marked �1. Cycle time will be about I!/2 to 2 hours, depending on time needed to heat water

NORMAL WASH Cycle
A double wash for normal to heavily soiled loads. [The Energy Guide Label data is based on this Cycle.] Cycle time is about 63 minutes. lal -

lil�l�l

IA

LIGHT WASH Cycle
For normal, everyday soiled loads Cycle time is about 58 minutes.

8