WHIRLPOOL DU915QWDB1
Instrukcja Obsługi

Selecting

cycle

options
Air Dry
When Air Dry is selected, the air in the dishwasher is not heated during .. the �dry� portion of a cycle. Using Air Dry helps save energy, but dishes take longer to dry and ii some spotting can occur. Some items (such as plastics) may need towel drying. For best drying, use a liquid rinse agent. automatically heats the air in the dishwasher during the �dry� portion of the cycle unless you select Air Dry.

if desired, press one or more Option pad(s). You can press an Option pad after the dishwasher starts as long as the cycle has not passed the point that the option is used. For example, you can press Air Dry any time before the cycle control knob reaches Dry.

Hi-Temp

Wash

When Hi-Temp Wash is selected, the dishwasher heats the water during the main wash of the Light, Normal, and Heavy cycles. Heating the water helps improve washing ll�iI results. The Pots-N-Pans cycle automatically uses Hi-Temp Wash.

NOTE: The dishwasher

For 900 Model Series:
l

NOTE: The cycle control knob does not
move while water is being heated. Once the water reaches the proper temperature, the cycle control knob will begin moving again.

Always select the Air Dry option when using the Rinse-Wash Later cycle.

For 915 Model Series:
l

The Air Dry option is automatically for the Rinse-Wash Later cycle.

selected

Changing

a cycle

setting
NOTE: Turning the cycle control knob
can cause the covered section of the detergent dispenser to open and release the detergent. Check the covered section if setting the Normal, Heavy, or Pots-NPans cycle. 5. Close the door firmly until it latches. The dishwasher starts the new cycle.

You can change a cycle setting anytime during any cycle. 1. Lift up the door latch to stop the cycle. 2. Turn the cycle control knob clockwise to the desired cycle. 3. if desired, press one or more option pad(s). 4. Check the detergent dispensers. They must be filled properly for the new cycle.

Changing

an option

setting

You can change option settings anytime during a cycle as long as the .. . cycle has not passed the point that the option is used. For example, you can press Air Iill Dry anytime before the cycle control knob reaches Dry. 1. Press the Reset Options pad. 2. Press 1 or more Option pad(s).

17