Gruba instrukcja - poprostu wszystko co potrzreba - polecam .
Tekstowy podgląd strony 15 (kliknij aby zobaczyć)
Adding
a dish during
a cycle
You can add items to the dishwasher bad anytime the ADD-A-DISH indicator is on.
1. Lii up the door latch to stop the cycle. Wait for spraying action to stop before opening the door. 2. Open the door and add the item. 3. Close the door, but do not latch it. Wait 30 seconds for the air in the dishwasher to warm up. Doing so reduces the amount of moisture in the vent when restarting a cycle. 4. Close the door firmly until it latches. The dishwasher resumes the cycle.
Using
the delay
wash
cycle
The 4 HOUR DELAY START indicator stays
Use 4 HOUR DELAY START to run the dishwasher during off -peak hours to reduce energy usage or to reduce daytime heat buildup in your home. 1. Close door firmly until it latches.
NOTES: l Press 4 HOUR DELAY START anytime during the delay period to start dishwasher immediately. 2. Press 4 HOUR DELAY START. The Dad
l
3. Press a Cycle pad. The DELAY START countdown begins when you 0-o= -press the Cycle pad. If you don�t press a Cycle pad within 30 seoonds, the DELAY R START indicator turns off. 4. If desired, press one or more Option pads.
Press CANCEUDRAIN to cancel the delay cycle. The 4 HOUR DELAY START indiitor will turn off. Press new Cycle and Option pads. a.,
liii
l
You can add items to the bad anytime during the delay countdown. After adding items, close the door firmly until it latches. The delay countdown will not continue if the door is not latched.
