PIONEER DV-09/KU/CA
Instrukcja Serwisowa

DV-09, DV-S9
Loading Mechanism Assy
Remove the tray panel after the tray opened.

Hold the DVD MAIN Assy on the MAIN SHIELD(lower).

Turn the short SW to ON position(outside)

OUTSIDE (Short position) Short SW

Turn the short SW to ON position(outside) after the PICK UP Assy moved most outside.

Remove the DVD MAIN Assy .

Remove the MAIN SHIELD(lower).

Remove the Mechanism Assy after the tray closed.

LOADING MECHANISM Assy

Assemble DOOR SUPPORT ASSY
1. Set the Gear Box to the Front Panel with condition like a indicated figure. 2. Set the door support block to the Front Panel with the Door Support opened most outside.

unengaged gear DRIVE GEAR A

lacked gear Fitting Mark () Turn clockwise

DRIVE GEAR B Fitting Mark () DRIVE GEAR D DRIVE GEAR C

NOTE: ÷ If it is hard to assemble, remove the Door Spring B. ÷ It is necessary to set precisely, if the gear is not engaged, the tray will touch the door .

SWITCH ARM

77