PIONEER DV-400-S/RAXU
Instrukcja Serwisowa

7.1.6 DISASSEMBLY DIAGNOSIS OF FJMB ASSY
1 Bonnet and Tray Panel

1 2 3 4 5 6

Remove the Bonnet (Screws � 6) Power ON Tray open (0) Remove the Tray Panel Tray close (0) Pull out the Power Cable from the outlet.
DOUT ASSY : This is not installed to this.

How to Open the Tray by Manual Operating
In the reverse state, pass a small screwdriver through a slit and slide a protruding portion of the Drive Gear of the Loading Mechanism Assy to the direction of arrow. If the Tray moved toward the front about 2 or 3 cm, pull out the Tray by hands. Small Square-bar Screwdriver

Slit

2
Protruding portion

Small Square-bar Screwdriver

4 5 3
Tray Tray Panel Loading Mechanism Assy

35

Drive Gear

2 Front Panel Assy

1 2 3 4

Unclamp the wire. Disconnect the wiring. Unhook (�6) Remove the Front Panel.

3

�3

3 4

�3

Front Panel

2 1

DV-353-K

71