Gruba instrukcja - poprostu wszystko co potrzreba - polecam .
Tekstowy podgląd strony 34 (kliknij aby zobaczyć)
To create your own setting (3)
You can only adjust this setting if the [Component Video] setting in the Video 1 menu is set to [Progressive].
6
Repeat steps 4 and 5 to make adjustments to other settings.
If you would like to save the settings in the player�s memory, be sure to select either [1], [2], or [3] in the [Prog. Memory] setting to establish which memory location to save the new settings in. Please note that if you select a location where settings have already been saved, the old settings will be replaced by the new ones.
1
Use the cursor button (3) to select [Start] then press ENTER.
Progressive Video Memory Select Progressive Video Setup
2
Use the cursor button (�) to select [Progressive Video Setup] then press ENTER.
Prog. Memory Move
ENTER
Off Select
1
2
3 Check
DISPLAY
7
Progressive Video Memory Select Progressive Video Setup
When you are finished making adjustments, press ENTER to establish the new settings.
3
Use the cursor buttons (2/3) to select the setting to [On] or [Off].
To create your own setting (4)
You can only adjust this setting if the [Component Video] setting in the Video 1 menu is set to [Progressive].
1
DNR Move
ENTER
Use the cursor button (3) to select [Start] then press ENTER.
Off Select
DISPLAY
MAX Check
4
Use the cursor buttons (5/�) to select the setting to adjust.
You can adjust any or all of the following picture quality factors: DNR Adjusts the amount of noise reduction (NR) applied to the Y (brightness) component. Sharpness Adjusts the sharpness of the mid-frequency (less detailed) elements in the picture. Detail Adjusts how sharp edges appear in the picture. Chroma Delay Compensates for misalingnment of the Y (brightness) and the C (colour) components. Gamma Adjusts the brightness of the darker images in the picture.
Progressive Video Memory Select Progressive Video Setup
2
Use the cursor button (�) to select [Progressive Video Setup] and press ENTER. Press DISPLAY.
Use the cursor buttons (2/3) to adjust the settings.
Adjust these while a disc is playing to see the effect of changes immediately.
Use the cursor buttons (5/�) to select the setting and use the cursor buttons (2/3) to adjust the settings.
Adjust these while a disc is playing to see the effect of changes immediately.
5
34
En
To memorize the setting, select [Prog. Memory1, 2, 3], then press ENTER.
The previous setting will be erased.
