PIONEER DV-533K/RLWXJN/NC
Instrukcja Serwisowa

DV-533, DV-3310, DV-533K, DV-5310KD

Disassembly of the Traverse Mechanism Assy and the Pickup Assy 1 2 3 4 5 6
Remove the Bonnet and Tray Panel. Remove the Front Panel. Remove the Bridge (Screw �1). Pull out the Tray and remove it while unhooking a Hook. Turn the Short SW to Short side. Remove three connectors.

7 8

Remove the Loading Mechanism Assy (Screws �4). Remove a screw.

Cautions:
Screw is locked with Silicone Adhesive. Please lock it with Silicone Adhesive when installs it. Remove the FFC Holder with the state which Flexible Cable was atatched. 8 Silicone Adhesive GEM1037 Traverse Mechanism Assy

9

4

-1

Hook Bridge

9 3
-2 -1

3

6 6

6

FFC Holder

4

-2 DVDM Assy Bottom View

RearView

Pickup Assy

Short

Open

5
Short SW

When Removing The Traverse Mechanism Assy

Caution in the tray insertion
In the Tray insertion, insert it after matching a triangle mark of the Loading Base and a position of pin of the Drive Cam. Triangle mark Loading Base

10 11 12

Remove the Pickup Flexible Cable Unhook ( �4) Remove the Traverse Mechanism Assy

Traverse Mechanism Assy

DVDM Assy Side

11 � 2

12

10

11 � 2

Traverse Mechanism Assy

Pin

Drive Cam

Exchange

73