PHILIPS DVD634/001/021/051
Instrukcja Serwisowa

EN 14

TopCover 300 3 screws 305 Dismounting remove

Mounting

DISMANTLING INSTRUCTIONS � Remove 4 screws 310 and

See exploded view of DVD634 for item numbers � Lift cover from rearside to

4.

Removes connections. � Remove cable connections Tray Open tray (see instruction below) 3 255 � Remove 2 screws 190 � Unlock Tray cover 055 (skt cinch and scart back(board to bottom frame)

Front cabinet 001 DVD Engine 145 Mpeg board 1002 Power supply unit 1005

DVD634 /0X1

� Unlock Front panel from frame by (Engine (Mpeg ( board to bottom frame)

close tray Remove 4 185 plate) and screws 290 � Release 2 spacer locking

� Place Front panel in front of it backward to remove.

releasing successively 4 snaps Close tray � Dismount board (2 side 2 on the bottom ) � Lift module up slightly and move

the set ( service position )

connections. � Remove cable connection 5 110 � Remove 2 screws 100

Front control Power ON/OFF board 1001

� Dismount board

(board ( board to Front cabinet )

4. Mechanical- and Dismantling Instructions

Mechanical- and Dismantling Instructions

Figure 4-1 Dismantling Instructions

Manually opening of tray When it is not possible to open tray with the EJECT button, the tray can manually be opened. no moving from left When a disc is loaded, unlock tray by pushing the slide inwards with Remove 4 screws to remove loader. to right a screwdriver and pull tray outwards.

CL 26532068_003.eps 010702