Control TV Programmes (continued)
Marking the contents for recording You need to �mark� the contents in the Time Shift Buffer before it can be recorded to the hard disk. The recording will take effect when you put the recorder to standby mode. Clearing the Time Shift Buffer All the contents in the Time Shift Buffer will be cleared when you switch the recorder to standby mode, except for the marked contents which will then be stored into the hard disk. You can also clear the contents using the following steps while the recorder is turned on. English 22
A Press OPTIONS on the remote control.
The tools menu appears.
21:00 22:13 23:30
Tools
Audio language Time search
Cancel Rec.
Prog Info
Reset TSB
Settings
To find a scene within the Time Shift Buffer Use m / M or / keys. To mark the starting point of recording Press REC z once. To mark the end of the recording Navigate to the end of the scene and press STOP x. To cancel the marked recording Press the Red button. Helpful Hint: � You can set the length of skip search interval, see chapter �System Menu Options Playback settings - { Replay interval } / { Skip interval }� for details.
B Move to { Reset TSB } and press OK.
A warning message on clearing the Time Shift Buffer appears.
Warning This action will clear the Time Shift Buffer. Do you want to continue?
Yes
No
C To proceed, select { Yes } in the menu
and press OK on the remote control. Otherwise, select { No } in the menu and press OK on the remote control to abort the operation. Note: In addition, executing the following actions will also clear the contents in the Time Shift Buffer: � Press CAM on the remote control. � Access { Tuner } option in the system settings menu. � Change the { Record mode } or { Clock } setting.
