Disc handling
Do not use irregularly shaped discs, such as heart-shaped. (These can damage the unit.)
The remote control
Batteries
R6, AA
1 2
º How to hold a disc
Do not touch the recorded surface.
Do not;
³mix old and new batteries. ³use different types at the same time. ³heat or expose to flame. ³take apart or short circuit. ³attempt to recharge alkaline or manganese batteries. ³use batteries if the covering has been peeled off. Mishandling of batteries can cause electrolyte leakage which can damage items the fluid contacts and may cause a fire. If electrolyte leaks from the batteries, consult your dealer. Wash thoroughly with water if electrolyte comes in contact with any part of your body. Remove if the remote control is not going to be used for a long period of time. Store in a cool, dark place. Replace if the unit does not respond to the remote control even when held close to the front panel.
º If the surface is dirty
Wipe it with a damp cloth and then wipe dry.
º If the disc is brought from a cold to a warm environment, moisture may form on the disc
Wipe with a soft, dry, lint-free cloth before using the disc.
º Handling precautions
³Do not write on the label side with a ball-point pen or other writing instrument. ³Do not use record cleaning sprays, benzine, thinner, static electricity prevention liquids or any other solvent. ³Do not attach labels or stickers to discs. (Do not use discs with exposed adhesive from tape or left over peeled-off stickers.) ³Do not use scratch-proof protectors or covers. ³Do not use discs printed with label printers available on the market.
Use
Remote control signal sensor
º Do not place or store discs in the following places
³Locations exposed to direct sunlight ³Humid or dusty locations ³Locations directly exposed to a heat vent or heating appliance
7 m (23 feet)
30°
30°
Aim at the sensor, avoiding obstacles, at a maximum range of 7 m (23 feet) directly in front of the unit. ³Keep the transmission window and the unit�s sensor free from dust. ³Operation can be affected by strong light sources, such as direct sunlight, and the glass doors on cabinets.
Do not;
³put heavy objects on the remote control. ³take the remote control apart. ³spill liquids onto the remote control.
RQT6012
Getting started
³Insert so the poles (i and j) match those in the remote control. ³Do not use rechargeable type batteries.
