PANASONIC DVD-S29GC
Instrukcja Serwisowa

DVD-S29GCS / DVD-S29GCU / DVD-S29GN / DVD-S29PLA / DVD-S29PL / DVD-S29EE / DVD-S29GCA / DVD-S29GC / DVD-S29GD / DVD-S29PX

7.3.

Tray
5. Remove the drive arm concave phase from the tray slider and tray.

1. Slide the guide tray unit while pressing the stopper in the arrow direction, and remove the guide tray unit.

2. Raise the loading unit. 3. Slide the lever in the arrow direction till it stops and pull the tray out.

<Assembling the tray unit> 1. Insert a part of the tray into the unit sliding over the groove on the mechanical chassis unit. 2. Insert the tray to the point before the tab of the mechanical chassis unit.

4. Spread the tabs at the both sides and pull the tray out. (The tray slides a little forward and stops.)

3. Hook the drive arm concave phase over the tray and the tray slider. 4. Press in the tray. 5. Make sure that the tray and the drive arm move smoothly.

13