06
Advanced Setup Menu (Settings for Commercial Use)
(3) COMMAND STACK
Designates a COMMAND STACK group and automatically begins playback. When [3. COMMAND STACK] is selected and the ENTER button is pressed, the [GROUP] menu will appear as shown; use the number buttons, cursor buttons, and ENTER button to select the desired COMMAND STACK group.
¶ When the ON time item is flashing, pressing the | button will cause the weekday item to flash; then the », « buttons can be used to change the weekday. This is convenient when you wish to set two or more ON/OFF times on the same weekday. ¶ If the weekday is set to [ALL], the same power ON/OFF settings can be applied to all days of the week. ¶ If no OFF time is set, the power will only turn ON. ¶ An OFF time can be set without setting any ON time if desired; in this case, the unit power turns OFF at the set time, but only if the timer has started from the power ON status.
3. After setting the power ON/OFF times, move the pointer to select the next operation to be performed following power ON from the following three.
Important
¶ This setting cannot be made if no ON time is set. ¶ Writing to memory is performed when the timer setting menu is closed. If the power is turned OFF before then, the timer settings will not be preserved. ¶ DVD discs programmed to begin automatic playback will not operate in accordance with their programmed setting.
Important
¶ The selected COMMAND STACK will be automatically repeated during playback.
4. When a play operation is set, the screen returns to the initial menu page.
¶ For example, when title 2, chapter 6 is set, the menu appears as follows.
(1) TOP MENU
The disc�s top menu opens. If the disc has no top menu, the disc stops.
(2) TITLE
Playback begins from designated title and chapter. When [2. TITLE] is selected and the ENTER button is pressed, the following menu appears displaying the [TITLE] and [CHAPTER]. The number buttons, cursor buttons, and ENTER button can then be used to select the desired title and chapter.
To set different ON/OFF and operation items for each day of the week, follow the same procedure as above to set [TUE], [WED], and so on, as required. To set the same times/operations for each day of the week, the [ALL] item can be set, together with the ON/OFF times and operation. In this way, the same operations will be performed each day of the week at the same times.
Note
Important
¶ When a title and chapter have been selected, the selected chapter will be played, and if subsequent chapters exist, playback will continue to those chapters. Playback will end at the end of the selected title. If repeat play has been set in the ADV. SETUP menu, however, when the selected chapter has completed playing, the set repeat play will occur. ¶ When setting a track on a CD or Video CD, input the desired track number in the menu�s [CHAPTER] item. Entries to the [TITLE] item will be ignored.
¶ When the cursor button is used to select a setting item followed by the CLEAR button, that setting value will be deleted.
Note
WEEKLY TIMER can be set by using either the remote control unit or the mouse. ¶ When the mouse cursor (hand pointer ) appears over an item, clicking the left mouse button allows the selection or setting to be changed. ¶ Numbers are incremented by 1 each time the left mouse button is clicked, and decremented by 1 with each click of the right mouse button. ¶ With the cursor over [ENTER], press the left mouse button to validate the selected values. ¶ With the cursor over [RETURN], press the left mouse button to return the previous mode. Previously entered values will be reset. ¶ Click on the page number (1/3) at the top right of the screen to change the page.
Note
¶ If you wish to merely turn the player ON, select [TITLE] and input any title number that does not physically exist on the disc.
50
