KENWOOD DVFR9030
Instrukcja Serwisowa

DV-4070-B/4900/DVF-R7030-B/R9030
DISASSEMBLY FOR REPAIR
3. How to Remove Clamper Ass'y
1. Remove screws.

4. How to Disassemble Clamper Ass'y
Clamper weight

Spacer

Magnet

Clamper

6. Tangential and Tilt Adjustment
1. Turn the power on with pressing the DISC 1 key. (Display shows "INSPECTION"; test mode.) 2. Press the DISC1 key in playback mode again. Display shows "Jitter *** %" 3. Turn off if cancel test mode.

5. How to Disassemble Traverse Unit
1. Move the traverse to upward by turning motor pulley ( ~ ). 2. Make the gap between the tray guide and guider(L) with driver( ) 3. Remove the screws( , ).

4 3
Guider (L) Protruding part Tray guide

2

Tangential adjustment screw

1

2

Tilt adjustment screw 2 Tilt adjustment screw 1 6 6 6

REAR

X13-7770-10

CN1

5 5

CN2

5

4