1. Press the JOG MODE select button so that the VINYL mode indicator lights. 2. During playback, press the top of the jog dial.
¶ Playback will slow and come to a stop (the time required to complete stop can be set independently). ¶ If the jog dial is rotated as playback slows but before it has completely stopped, sound will be interrupted suddenly, and will then start again, but in the direction corresponding to the direction the jog dial is rotated in step 3.
3. Rotate the jog dial in the desired direction of playback.
¶ Playback will occur in proportion to the direction and speed of jog dial rotation.
4. Release hand from surface of jog dial.
¶ Playback will return to its original status (the time required until full acceleration can be set independently).
I To set the deceleration time (time until playback fully stops when jog dial surface is pressed) Rotate the TOUCH/BRAKE response dial.
¶ The time till playback stops changes. ¶ This is the same setting as the deceleration speed adjustment used when the PLAY/PAUSE (6) button is pressed in VINYL mode to temporarily pause playback.
I To set the acceleration time (time until playback fully regains original speed when hand is released from jog dial surface) Rotate the RELEASE/START response dial.
¶ The time till playback returns to normal speed changes. ¶ This is the same setting as the acceleration speed adjustment used when the PLAY/PAUSE (6) button is pressed in VINYL mode to resume playback.
[Hyper jog mode]
When jog mode is set to VINYL mode ON, press the HYPERJOG MODE button so that the indicator lights. When the jog dial is then rotated, the amount of sound or image change will quadruple (x4) in response to the rotation angle of the dial.
