Gruba instrukcja - poprostu wszystko co potrzreba - polecam .
Tekstowy podgląd strony 24 (kliknij aby zobaczyć)
DVD Setup Menu Options
LPCM Output If you connect the DVD Player to a PCM compatible receiver via the digital terminals, such as coaxial or optical etc, you may need to adjust �LPCM Output�. Discs are recorded at a certain sampling rate. The higher the sampling rate, the better the sound quality. Night Mode - turning on/off In this mode, the high volume outputs are softened and low volume outputs are brought upward to an audible level. It is useful for watching your favourite action movie without disturbing others at night.
Language Digital Output LPCM Output Night Mode
Video PCM 48Khz On
Audio
Rating
Language Digital Output LPCM Output Night Mode
Video PCM 48Khz On
Audio
Rating
48Khz 96Khz
On Off
1 In �AUDIO SETUP�, press OK to enter 1 In �AUDIO SETUP�, press OK to enter
the submenu.
2 Press 3 4 to highlight {Night Mode}, then
press OK.
the submenu.
2 Press 3 4 to highlight {LPCM Output},
then press OK.
3 Press 34 to highlight one of the options
below: ON Select this to level out the volume. This feature is only available for movies with Dolby Digital mode. OFF Select this when you want to enjoy the surround sound with its full dynamic range.
3 Press 34 to highlight one of the options
below: 48kHz Playback a disc recorded at the sampling rate of 48kHz. 96kHz Playback a disc recorded at the sampling rate of 96kHz that can only be achieved in Stereo-Classic mode.
4 Select an item and press OK.
4 Select an item and press OK.
Helpful Hint: � LPCM Output can be selected only when PCM is activated.
TIPS:
To return to the previous menu, press OK. To remove the menu, press SYSTEM MENU.