Gruba instrukcja - poprostu wszystko co potrzreba - polecam .
Tekstowy podgląd strony 15 (kliknij aby zobaczyć)
Getting Started
Selecting the color system that corresponds to your TV This DVD Player is compatible with both NTSC and PAL. In order for a DVD disc to play on this Player, the color system of the Disc, the TV and the DVD Player should match. Helpful Hint: � Before changing the current TV Type setting, ensure that your TV supports the �selected TV Type� system. � Follow the instructions that appears on the TV screen. � If there is no proper picture on your TV, wait for 15 seconds for auto recovery.
- - Video Setup Page - TV Type TV Display Closed Captions Angle Mark Progressive Smart Picture Picture Setting PAL NTSC Multi
HINTS:(refer to the owner's manual Changing to (selected TV Type) 1. Ensure your TV supports it. 2. If there is a blank screen on normal TV, wait 15 seconds for auto recover
OK
Cancel
< > - Move
OK - Select
Set TV Standard
1 Press SYSTEM MENU. 2 Press 1 2 to select �Video Setup Page�. 3 Use the 1 2 3 4 keys on the Remote
Control to navigate in the menu. Move to �TV Type� and press 2.
Confirm again to use (selected TV Type) If picture is good press OK on remote
Cancel
OK
TO GO BACK TO (Current TV Type): 1. Open tray 2. Press '3' Key < > - Move OK - Select
4
PAL � Select this if the connected TV is PAL system. It will change the video signal of a NTSC disc and output in PAL format. NTSC � Select this if the connected TV is NTSC system. It will change the video signal of a PAL disc and output in NTSC format. Multi � Select this if the connected TV is compatible with both NTSC and PAL (multi-system). The output format will be in accordance with the video signal of the disc. Select an item and press OK.
To exit from the menu Press SYSTEM MENU or select �Exit Setup Menu� and then press OK.
