PHILIPS DVP533K/78
Instrukcja Obsługi

System Menu Options
Audio Setup Page
The options included in Audio Setup page are: �Speaker Setup�, �Digital Audio Setup�, �Dolby Digital Setup�, �Equalizer� and �3D�. Digital Audio Setup The options included in Digital Audio Setup are: �Digital Output� and �LPCM Output�.

1 Press SYSTEM MENU. 2 Press 1 2 to select the �Audio Setup� page.
Speaker Setup The options included in Speaker Setup are: �Downmix� and �D.R.C�.

1 Press the 34 keys to highlight an option. 2 Enter its submenu by pressing 2. 3 Move the cursor by pressing the 34 keys
to highlight the selected item.
- - Digital Audio Page - Digital Output LPCM Output SPDIF Off All PCM Only

1 Press the 34 keys to highlight an option.
to highlight the selected item.

2 Enter its submenu by pressing 2. 3 Move the cursor by pressing the 34 keys

Setup SPDIF

- - Speaker Setup Page - Downmix D.R.C LT/RT Stereo Virtual Surround

Set Downmix Mode

Downmix This options allows you to set the stereo analog output of your DVD Player. � LT/RT: Select this option if your DVD Player is connected to a Dolby Pro Logic decoder. � Stereo: Select this option when output delivers sound from only the two front speakers. � Virtual Surround: Allows the DVD player to use virtual surround sound effects. D.R.C. (Dynamic Range Control) Analogue sound dynamic range compression. � On: Audio with fully compressed dynamic range. � Off: Audio with uncompressed dynamic range. � Auto: Select �Auto� adjust the dynamic level automatically according to the disc record.

Digital Output Set the Digital output according to your optional audio equipment connection. � SPDIF Off: Turn off the SPDIF output. � All: If you have connected your DIGITAL AUDIO OUT to a multi-channel decoder/receiver. � PCM Only: Only if your receiver is not capable of decoding multi-channel audio. Helpful Hint: � If DIGITAL OUTPUT is set to �All�, all audio settings except MUTE are invalid. LPCM Output If you connect the DVD Player to a PCM compatible receiver via the digital terminals, such as coaxial or optical etc, you may need to adjust �LPCM Output�. Discs are recorded at a certain sampling rate. The higher the sampling rate, the better the sound quality. � 48kHz: Playback a disc recorded at the sampling rate of 48kHz. � 96kHz: Playback a disc recorded at the sampling rate of 96kHz. Helpful Hint: � LPCM Output can be selected only when PCM Only is activated. 25
E n g l i s h

01-34 DVP533K_78

25

19/03/2004, 2:568239 PM

300 32131