|
Kto jest w sklepie?
Sklep przegląda 5765 gości i 23 zarejestrowanych klientów
|
Kategorie
|
Informacje
|
Polecamy
|
|
|
|
|
Dla tego produktu nie napisano jeszcze recenzji!
x BALANCE You can vary the balance of the left and right speakers as follows. Be sure to set �TEST TONE� to �ON� for easy adjustment (see x TEST TONE below). The default adjustments are in parentheses. � FRONT (0dB) Adjust the balance between the front left and right speakers (�6dB [L] to +6dB [R], 0.5dB increments). � REAR (0dB) Adjust the balance between the rear left and right speakers (�6dB [L] to +6dB [R], 0.5dB increments). To return to the default setting Select the item, then press CLEAR. x LEVEL You can vary the level of each speaker as follows. The front speaker level becomes the criterion for adjusting the other speakers. Be sure to set �TEST TONE� to �ON� for easy adjustment (see x TEST TONE below). The default adjustments are in parentheses. � CENTER (0dB) Adjust the level of the center speaker (�6dB to +6dB, 0.5dB increments). � REAR (0dB) Adjust the level of the rear speakers (�6dB to +6dB, 0.5dB increments). � SUBWOOFER (0dB) Adjust the level of the subwoofer (�10dB to +10dB, 0.5dB increments). To return to the default setting Select the item, then press CLEAR. x TEST TONE The speakers will emit a test tone. Use this when you use the 5.1CH OUTPUT connectors and adjust the BALANCE and LEVEL. � OFF: The test tone is not emitted from the speakers. � ON: The test tone is emitted from each speaker in sequence. When you select one of the �SPEAKER SETUP� items, the test tone is emitted from both left and right speakers simultaneously.
Note
When you adjust the speaker settings, the sound cuts off for a moment.
Adjusting the speaker volume
1 2
After you stop playback, select �SPEAKER SETUP� in the setup display. Select �TEST TONE� and set �TEST TONE� to �ON.� You will hear the test tone from each speaker in sequence. From your listening position, select �BALANCE� or �LEVEL� and adjust the value of �BALANCE� using </, and �LEVEL� using M/m. The test tone is emitted from both left and right speakers simultaneously. Select �TEST TONE� and set �TEST TONE� to �OFF� to turn off the test tone.
3
4
To adjust the volume of all the speakers at one time Use the receiver�s (amplifier�s) volume control.
Settings and Adjustments
69
|
|
|
> |
|