jedyne do czego mogę mieć zastrzeżenie to jakość zdjęć zawartych w przesłanej instrukcji serwisowej ponieważ są fatalnej jakości, praktycznie nieczytelne. tak poza tym jestem zadowolony to jest to czego szukałem.
Instrukcja jest OK. Schematy czytelne, opisane niektóre procedury.
Tekstowy podgląd strony 44 (kliknij aby zobaczyć)
A (S-1) [1] (S-1)
[3] [4] (L-1)
(L-3) [5] (S-1A) [6] (P-1) B (L-2)
Installation of [3] and [6]
First, insert [6] diagonally in [3] as shown below. Then, install [6] in [3] while pushing (L-1) in a direction of arrow. After installing [6] in [3], confirm that pin A of [3]
Fig. DM3H
enters hole A of [6] properly. [3]
Pin D Pin C [2] A 1 2 Pull up Slide View for A
1 (L-1) 2 [6] Hole A Pin A
Installation of [4] and [6]
Install [6] in [4] while pulling (L-2) in a direction of arrow. After installing [6] in [4], confirm that pin B of [4] enters hole B of [6] properly.
Pin A
[4] Pin B Slot A View for B Hole B Pin B (L-2) [6]
Slots B
Fig. DM5H
Slot A First, while pushing the locking tab as shown in the right, slide and pull up the right side on [2] to release Pin A and Pin B from the slots A. Then, remove Pin C and Pin D on [2] from the slots B as shown. Locking tab View for A
