|
|
|
Kto jest w sklepie?
Sklep przegląda 5768 gości |
|
Kategorie
|
|
Informacje
|
|
Polecamy
|
|
|
 |
|
|
Dla tego produktu nie napisano jeszcze recenzji!
 ;
jedyne do czego mogę mieć zastrzeżenie to jakość zdjęć zawartych w przesłanej instrukcji serwisowej ponieważ są fatalnej jakości, praktycznie nieczytelne. tak poza tym jestem zadowolony to jest to czego szukałem.
 ;
Wszystko w porządku.
Instrukcja czytelna i kompletna.
Dziękuję.
all right!
thank you.
;
Bardzo dobra instrukcja. Zawiera wszystko co potrzeba, polecam!
;
Instrukcja jest OK. Schematy czytelne, opisane niektóre procedury.
;
Instrukcja bardzo czytelna. zawiera co potrzeba. Polecam
DVP-NS3100ES SECTION 4 SERVICE MODE
TRAY LOCK
This mode let you lock the disc tray. When this mode is activated, the disc will not eject when A button is pressed. The message �TRAY LOCKED� will be displayed in on the FL tube. Procedure: 1. Press the I/1 button to turn the power on. 2. While pressing the x button, press the A button until �TRAY LOCKED�or�TRAY UNLOCKED�displayed on the FL tube (around 5 seconds).
SHIP MODE
If this mode is dxecuted, each setting data is initialized. Procedure: 1. In the standby mode, while pressing the X and [SA-CD/CD] buttons,press the N button. 2. When enter the Ship Mode, it displays �SETUP INIT� on the FL tube and start the data initializing. 3. When the initializing is complete, it displays �FINISHED� on the FL tube, Then press the I/1 button and back to standby mode.
CHILD LOCK
This player can lock the disc tray to prevent children from opening it. Procedure: 1. In the standby mode, press the [RETURN] , [ENTER] , I/1 buttons on the remote in this order. 2. It turns on and �LOCKED� appears on the FL rube. 3. The [OPEN/CLOSE] button on the player and the remote do not work thile this lock is set. 4. To release this lock, when the player is in standby mode,operate the remote in the same manner as step 1 again. It turns jon ande �UNLOCK�appears on the FL tube.
COMMAND MODE SETTING
If the supplied remote interferes with your other Sony DVD player, change the command mode setting for this player and the supplied remote to one that differs from the other Sony DVD player. The default command mode setting for this player and the supplied remote is DVD 1. Procedure: 1. slide the COMMAND MODE switch in the battery case of the remote to select the command mode(DVD 1, DVD 2, or DVD 3) so that the setting for the remote differs from that of the other DVD players. For example, it the other DVD players respond to the default command mode setting for the supplied remote(DVD 1), set the remote to DVD 2 or DVD 3. 2. In the standby mode, hold down [MULTI/2CH] button and press I/1 button on the player. The command mode appears or the FL tube as follows.
Sample display
C, MODE DVD2
3. Repeat steps 2 and 3 until the displayed command mode matches that of the supplied remote.
11
|
|
|
> |
|
