SONY DVPNS575P
Instrukcja Obsługi

Controlling Your TV with the Supplied Remote
You can control the sound level, input source, and power switch of your Sony TV with the supplied remote.
TV
Number buttons

Controlling other TVs with the remote
You can control the sound level, input source, and power switch of non-Sony TVs as well. If your TV is listed in the table below, set the appropriate manufacturer�s code.

1
VOL +/TV/VIDEO

While holding down TV [/1, press the number buttons to select your TV�s manufacturer�s code (see the table below). Release TV [/1.

2

Code numbers of controllable TVs
If more than one code number is listed, try entering them one at a time until you find the one that works with your TV.
Manufacturer Sony Code number 01 (default) 04, 22 02, 04 09 04

You can control your TV using the buttons below.
By pressing TV [/1 VOL +/� TV/VIDEO You can Turn the TV on or off Adjust the volume of the TV Switch the TV�s input source between the TV and other input sources.

Daewoo Hitachi JVC LG/Goldstar

MGA/Mitsubishi 04, 13 Panasonic Philips RCA Samsung Sharp Toshiba 19 21 04, 10 04, 20 18 07, 18

Note
Depending on the unit being connected, you may not be able to control your TV using all or some of the buttons on the supplied remote.

Notes
� If you enter a new code number, the code number previously entered will be erased. � When you replace the remote�s batteries, the code number you have set may be reset to the default setting. Set the appropriate code number again. � Depending on the unit being connected, you may not be able to control your TV using all or some of the buttons on the supplied remote.

62