SONY DVPNS70H
Instrukcja Serwisowa

DVP-NS70H

Controlling other TVs with the remote
You can control the sound level, input source, and power switch of non-Sony TVs as well. If your TV is listed in the table below, set the appropriate manufacturer�s code.

3 Press X/x to select �CUSTOM,�
Settings and Adjustments

then press ENTER.
The Setup Display appears.
LANGUAGE SETUP OSD: MENU: AUDIO: SUBTITLE: ENGLISH ENGLISH ORIGINAL ENGLISH

Using the Setup Display
By using the Setup Display, you can make various adjustments to items such as picture and sound. You can also set a language for the subtitles and the Setup Display, among other things. For details on each Setup Display item, see pages from 61 to 67.

1 2

While holding down TV [/1, press the number buttons to select your TV�s manufacturer�s code (see the table below). Release TV [/1.

4 Press X/x to select the setup item
from the displayed list: �LANGUAGE SETUP,� �SCREEN SETUP,� �CUSTOM SETUP� or �AUDIO SETUP.� Then press ENTER.
The Setup item is selected. Example: �SCREEN SETUP�
Selected item

Note Code numbers of controllable TVs
If more than one code number is listed, try entering them one at a time until you find the one that works with your TV.
Manufacturer Sony Daewoo Hitachi JVC LG/Goldstar Code number 01 (default) 04, 22 02, 04 09 04
Using Various Additional Functions Settings and Adjustments
Playback settings stored in the disc take priority over the Setup Display settings and not all of the functions described may work.

ENTER DISPLAY

SCREEN SETUP TV TYPE: HDMI RESOLUTION: YCBCR/RGB (HDMI): SCREEN SAVER:

16:9 AUTO YCBCR ON

MGA/Mitsubishi 04, 13 Panasonic Philips RCA Samsung Sharp Toshiba 19 21 04, 10 04, 20 18 07, 18

BACKGROUND: JACKET PICTURE BLACK LEVEL: ON BLACK LEVEL (COMPONENT OUT): OFF 4:3 OUTPUT: FULL

Setup items

1 Press DISPLAY when the player is
in stop mode.
The Control Menu appears.

5 Press X/x to select an item, then
press ENTER.
The options for the selected item appear. Example: �TV TYPE�
SCREEN SETUP TV TYPE: 16:9 HDMI RESOLUTION: 16:9 YCBCR/RGB (HDMI): 4:3 LETTER BOX SCREEN SAVER: 4:3 PAN SCAN BACKGROUND: JACKET PICTURE BLACK LEVEL: ON BLACK LEVEL (COMPONENT OUT): OFF FULL 4:3 OUTPUT:

Notes
� When you replace the batteries of the remote, the code number you have set may be reset to the default setting. Set the appropriate code number again. � Depending on the connected unit, you may not be able to control your TV using all or some of the buttons on the supplied remote.

2 Press X/x to select
(SETUP), then press ENTER.
The options for �SETUP� appear.
( 47 ) STOP DVD VIDEO

Options
QUICK CUSTOM RESET QUICK

59

60

6 Press X/x to select a setting, then
press ENTER.
The setting is selected and setup is complete. Example: �4:3 PAN SCAN�
Selected setting
SCREEN SETUP TV TYPE: 4:3 PAN SCAN HDMI RESOLUTION: AUTO YCBCR/RGB (HDMI): YCBCR SCREEN SAVER: ON BACKGROUND: JACKET PICTURE BLACK LEVEL: ON BLACK LEVEL (COMPONENT OUT): OFF 4:3 OUTPUT: FULL

Setting the Display or Sound Track Language
(LANGUAGE SETUP)
�LANGUAGE SETUP� allows you to set various languages for the on-screen display or sound track. Select �LANGUAGE SETUP� in the Setup Display. To use the display, see �Using the Setup Display� (page 60).
LANGUAGE SETUP OSD: MENU: AUDIO: SUBTITLE:

Settings for the Display
(SCREEN SETUP)
Choose settings according to the TV to be connected. Select �SCREEN SETUP� in the Setup Display. To use the display, see �Using the Setup Display� (page 60). The default settings are underlined.
SCREEN SETUP TV TYPE: HDMI RESOLUTION: 16:9 AUTO

Depending on the DVD, �4:3 LETTER BOX� may be selected automatically instead of �4:3 PAN SCAN� or vice versa.

Note

� HDMI RESOLUTION
Selects the type of video signals output from the HDMI OUT jack. When you select AUTO (default), the player outputs video signals of the highest resolution acceptable for your TV. If the picture is not clear, natural or to your satisfaction, try another option that suits the disc and your TV/projector, etc. For details, refer also to the instruction manual supplied with the TV/projector, etc.
AUTO Normally, select this. signals. Sends 1280� 720p video signals. Sends 720� 480p video signals. 1920� 1080i Sends 1920� 1080i video 1280� 720p

YCBCR/RGB (HDMI):
ENGLISH ENGLISH
ORIGINAL

YCBCR

SCREEN SAVER: BACKGROUND:

ENGLISH

To enter the Quick Setup mode
Select �QUICK� in step 3. Follow from step 5 of the Quick Setup explanation to make basic adjustments (page 23).

ON JACKET PICTURE BLACK LEVEL: ON BLACK LEVEL (COMPONENT OUT): OFF 4:3 OUTPUT: FULL

� TV TYPE � OSD (On-Screen Display)
Switches the display language on the screen. Selects the aspect ratio of the connected TV (4:3 standard or wide).
16:9 Select this when you connect a wide-screen TV or a TV with a wide mode function. 4:3 LETTER BOX Select this when you connect a 4:3 screen TV. Displays a wide picture with bands on the upper and lower portions of the screen. 720� 480p

To reset all of the �SETUP� settings

1 2

Select �RESET� in step 3 and press ENTER. Select �YES� using X/x. You can also quit the process and return to the Control Menu by selecting �NO� here. Press ENTER. All the settings explained on pages 61 to 67 return to the default settings. Do not press [/1 while resetting the player, which takes a few seconds to complete.

� MENU (DVD VIDEO only)
You can select the desired language for the disc�s menu.

Even when a setting other than �AUTO� is selected and the connected TV cannot accept the resolution, the player automatically adjusts the video signals that are suitable for the TV.

Note

� AUDIO (DVD VIDEO only)
Switches the language of the sound track. When you select �ORIGINAL,� the language given priority in the disc is selected.

� YCBCR/RGB (HDMI)
Selects the type of HDMI signal output from HDMI OUT jack.
YCBCR RGB Outputs YCBCR signals. Outputs RGB signals.

3

� SUBTITLE (DVD VIDEO only)
Switches the language of the subtitle recorded on the DVD VIDEO. When you select �AUDIO FOLLOW,� the language for the subtitles changes according to the language you selected for the sound track.
z Hint If you select �OTHERS t� in �MENU,� �SUBTITLE,� or �AUDIO,� select and enter a language code from �Language Code List� on page 75 using the number buttons.

4:3 Select this when you connect a PAN SCAN 4:3 screen TV. Automatically displays the wide picture on the entire screen and cuts off the portions that do not fit.
16:9

� If the playback picture becomes distorted, set �YCBCR� to �RGB.� � If the HDMI OUT jack is connected to equipment with a DVI jack, �RGB� signals will be automatically output even when you select �YCBCR�.

Notes

4:3 LETTER BOX

Note
If you select a language in �MENU,� �SUBTITLE� or �AUDIO� that is not recorded on a DVD VIDEO, one of the recorded languages will be automatically selected.

4:3 PAN SCAN

61

62

1-15