The new recording details are added to the list of scheduled recordings in the Timer screen and the New Timer Recording window closes. Note: When you want to cancel the scheduled recording temporarily, press the T-REC button once. To re-enable the timer recordings, press the T-REC button again. If selected, the VPS/PDC recording option from TV is possible only if supported by the broadcaster. The VPS/PDC function allows the recording to follow the exact start and stop times of the programme, even if it is running late. When in VPS/PDC mode, for a recording to take place, the exact start time of the scheduled recording must be entered. The scanning time of the VPS/PDC Signal is from the start time to the end time. If the VPS/PDC Signal does not come into the unit until the end, the program schedule will be cancelled by itself. With regard to the VPS/PDC Signal Scan, it executes before the start time 15minutes. In this time, if you want to change the TV channel, it displays as VPS/PDC REC on the front of unit. Then, you can not change the channel. In order for the Timer Recording, you should push the button, T-Rec, after making the Timer Recording Schedule. In case of the power off of the unit, you can see � Timer Icon � on the front of the unit if the Timer Recording is on. The unit should wake up 15minutes before the recording, then the unit will be on the stand-by mode for the recording. 3 minutes after the recording finish, the unit will go back to the power off mode.
ENTER
1
3
Updating a Scheduled Recording
You can update any of the details of any of scheduled recordings.
1 From the Timer Screen, use the 5, b to more to
desired scheduled recording. The Action bar is highlighted with update automatically selected.
2 Press the ENTER
The New Timer Recording window opens with the details of the scheduled recording displayed.
3 See Scheduling a New Recording, to make any nec-
essary changes to start time, date, end time and date and recurrence, etc.
4 Use the b to select update to save the changes. 5 Press RETURN to close the Timer Screen.
