Tekstowy podgląd strony 118 (kliknij aby zobaczyć)
14
The Initial Setup menu
Setting Manual CH Setting
Options Next Screen
Explanation Proceed to the next screen if you need to adjust any of the settings made by auto tuning. Select your country, then proceed to the manual channel setting screen: � Change channel presets using the / buttons. � To skip the displayed channel (because there is no station assigned to that channel), change the Skip setting to On. � Set the CH SYSTEM setting to match the channel system of your country or region. � Set the CHANNEL setting to the channel you want to assign to the current channel preset. � To manually �ne tune the channel, change the AFT setting to Off then adjust the Level setting. � Set the Sound System setting to match the sound system of your region. � The Name �eld allows you to input a name of up to �ve characters for the current channel preset. � If the currently selected channel is scrambled requiring a decoder connected to the AV2 (INPUT 1/ DECODER), set the Decoder setting to On. Proceed to the next screen to swap channel assignments of different presets so that you can group together presets that naturally go together. Select two presets to swap then press ENTER.
Channel Swapping
Next Screen
Video In/Out Input Colour System Next Screen Proceed to the next screen to set the input colour system for the external input and the built-in TV tuner. Use the CH +/� buttons to change the preset. On the default Auto setting the recorder can generally correctly detect whether the input signal is PAL, SECAM, 3.58 NTSC or PAL-60, but in some cases you may have to set it manually if the picture is displayed incorrectly.
See also About the input colour system on page 128 for more information on this setting.
