|
Dla tego produktu nie napisano jeszcze recenzji!
The Initial Setup Menu
Dual Mono Recording
� Default: L
10
Tuner Audio Level
� Default: Standard
When recording a dual mono source from an external input in Video mode or VR mode set to MN32*, you can choose to record either the L (left), or the R (right) audio channel. * This does not apply if recording from the DV input.
If the audio from the built-in TV tuner seems loud compared to disc playback, set this to Minimum, otherwise leave on the Standard setting.
Audio Output settings
If you�re recording in VR mode (except when set to MN32*), both channels will be recorded and you can switch them as you like on playback.
Digital Out
� Default setting: On
DV Input
� Default: Stereo1
You need to set this if you have a camcorder using 32kHz/1 2-bit sound connected to the front panel DV IN/OUT jack.
If at any time you need to switch off the digital audio output, set this to Off, otherwise leave it On. Note that you can�t switch on/off the optical and coaxial outputs individually.
Dolby Digital Out
� Default: Dolby Digital Some digital camcorders have two stereo tracks for audio. One is recorded at the time of shooting; the other is for overdubbing after shooting. On the Stereo1 setting, the sound that was recorded while shooting is used. On the Stereo2 setting, the overdubbed sound is used.
See page 29 for more on this setting.
81
En
|
