PIONEER DVR-7000/WV
Instrukcja Obsługi

The Initial Setup Menu Audio Out settings
If you�re recording in VR mode, both channels will be recorded and you can switch them as you like on playback.

10

Digital Out
� Default: On

DV Input
� Default: Stereo1

You need to set this if you have DV equipment using 32kHz/1 2-bit sound connected to the front panel DV IN/OUT jack.

If at any time you need to switch off the digital audio output, set this to Off, otherwise leave it On. Note that you can�t switch on/off the optical and coaxial outputs individually.

Dolby Digital Out
Some DV camcorders have two stereo tracks for audio. One is recorded at the time of shooting; the other is for overdubbing after shooting. On the Stereo1 setting, the sound that was recorded while shooting is used. On the Stereo2 setting, the overdubbed sound is used. � Default: Dolby Digital

See page 31 for more on this setting.

DTS Out
� Default: Off

See page 31 for more on this setting.

Tuner Audio Level
� Default: Standard � If you set to On with a non-DTS compatible amplifier, noise will be output when you play a DTS disc. � When set to On, there is no analog audio output when playing a DTS DVD-Video disc. � When playing a DTS audio CD (even when DTS Out is Off), noise is output from the analog outputs. Do not play this through your amplifier and speakers. � When playing a DTS audio CD, make sure that Stereo is selected using the AUDIO button. See page 52.

If the audio from the built-in TV tuner seems loud compared to disc playback, set this to Minimum, otherwise leave on the Standard setting.

96kHz PCM Out
� Default: 96kHz = 48kHz

See page 32 for more on this setting.

85
En