KENWOOD DV-S701
Instrukcja Obsługi

Changing the initial setup
DV-S701 (En/E)

Changing initial setup [7 Digital Audio Output] 1 Perform steps 1 and 2 of the procedure in �Basic operation for changing the initial
setup�.
r

51

2 Select the item to be set.
RC GRC
Digital Audio Output 1 LPCM(DVD) Off 2 Dolby Digital Bitstream 3 MPEG PCM

1 Select an item with the cursor (%, �) keys. 2 Press the ENTER key.

0 Exit
ENTER

ENTER

Each press of the cursor (%, �) key switches the items as follows.
1 1 LPCM (DVD) : When playing a DVD with linear PCM recording, whether the playback signal is to be converted into a 48 kHz/16-bit signal and output at the digital audio output (optical/ coaxial) or not can be selected. 2 2 Dolby Digital : When playing a DVD with Dolby Digital (AC-3) recording, the format of the signal output from the digital audio output (optical/coaxial) can be selected (from bitstream and PCM). 3 3 MPEG : When playing a DVD with MPEG recording, the format of the signal output from the digital audio output (optical/ coaxial) can be selected (from bitstream and PCM). 4 0 Exit : Exits the current screen.

Enter
ENTER

3 Select the desired option.
RC GRC 1 Select an item with the cursor (%, �) keys. 2 Press the ENTER key.

Setting details
When [1 LPCM (DVD)] is selected:
1 Off (Factory setup) Only the linear PCM audio digital signal with 48 kHz/16-bit recording is output. No digital signal is output during playback of a DVD with 48 kHz/ 20-bit or 24-bit or 96 kHz linear PCM recording. 2 PCM When a DVD with 48 kHz/20-bit or 24-bit or 96 kHz linear PCM recording is played, the signal is converted into a 48 kHz/16-bit signal and output at the digital outputs. ÷ The digital output of the PCM audio becomes a 48 kHz/16-bit or lower signal because of the consideration for the copyright.

ENTER

ENTER

Enter
ENTER

The setup completes and the initial setup screen appears again.

When [2 Dolby Digital] is selected:
1 Bitstream (Factory setup) When a DVD with Dolby Digital (AC-3) recording is played, the Dolby Digital (AC-3) bitstream (2- to 6-channel) audio is output. Select this option when a Dolby Digital (AC-3) decoder is connected to the player. 2 PCM When a DVD with Dolby Digital (AC-3) recording is played, the signal is converted into a 48 kHz/16-bit signal and output at the digital outputs.

To return to the previous menu screen
Press the RETURN key.

When [3 MPEG] is selected:

To exit initial setup
Select �0 Exit� in the initial setup screen.

1 PCM (Factory setup) The PCM (2-channel) signal is output. 2 Bitstream The bitstream is output.

Other Operations Preparations