MENU ITEMS VIDEO SETUP
TV DISPLAY: The aspect ratio of the picture provided by the DVD player can be varied in line with the features available on the TV in use. The options available are:
The video standart of the DVD player output can be selected from �MULTI� or �PAL�. If �MULTI� is selected, the output standart will be either NTSC or PAL depending on the DVD being played. If �PAL� is selected, the video output will be converted to PAL standard irrespective of disc standard.
NOTE: When an NTSC disc is played, it is possible that some subtitles will be distorted. If this happens please change TV TYPE to �MULTI�. VIDEO OUTPUT: The Video output of the DVD player can be selected as �SVIDEO� or �RGB�. If �S-VIDEO� is selected, RGB output via scart will be disabled, only CVBS will be active via scart. �S-VIDEO� output will be active via MiniDIN connector. After switching to S-VIDEO, TV should be switched to S-VIDEO input with TV remote control. If �S-VIDEO� is selected in order to disable RGB via scart and user prefers to watch CVBS via scart, TV should be switched to scart input with TV remote control. If �RGB� is selected, S-VIDEO output will be disabled. Scart output will be CVBS+RGB. This is the factory setting of the DVD player.
NORMAL / PS (4x3 Pan & Scan): Allows you to see the movie fill the entire screen of your TV, but not the right and left edges. This type of picture can only be viewed, if it is contained on the disc.
NORMAL / LB (4x3 Letterbox): Allows you to see movies in their original aspect ratio. You will see the entire frame of the movie, but it will occupy a smaller portion of the screen.
WIDE (Wide screen 16x9): Choose this setting if your DVD player is connected to a wide-screen TV.
Please Note: Depending on the format of the DVD disc. (eg. 2.35:1) the picture may still have black lines above and below this picture.
