Gruba instrukcja - poprostu wszystko co potrzreba - polecam .
Tekstowy podgląd strony 7 (kliknij aby zobaczyć)
MAINTENANCE AND CLEANING
Before cleaning or carrying out maintenance, press the ON/OFF push button and close the water tap. 1. Clean the appliance exterior with a neutral detergent. Do not use abrasive detergents. 2. Regularly wipe the door seal and inside of the door with a damp cloth to remove any food residues. If the spray nozzles become clogged with food residues, clean the spray arms as follows: Upper spray arm: � Detach the spray arm by pushing it up 1 and turning it counter-clockwise 2 then pull it down 3. � Rinse the nozzles under running water. � Remount the spray arm by aligning it with the rotary mounting and insert it. Make sure the spray arm rotates freely. Lower spray arm: � Pull the spray arm up (see drawing). � Rinse the nozzles under running water. � Remount the spray arm by aligning it with the rotor pin and insert it. � Remount the spray arm and pull it down. Make sure the spray arm rotates freely. Cleaning the filters: 1. Rotate the central filter H by turning it counter-clockwise and extract it by pulling it up. 2. Pull out the cylindrical filter L and extract it from the microfilter M separate the plactic filters by gently pushing on both pieces and pull (see drawing). 3. Having removed the central filter you have also the possibility to take out the G filter (it is sufficient to lift it out). 4. Clean all the components. While Reassembling please note that the filters must be correctly assembled to ensure good washing results.
