Setting the dimmer level (DMR LEVEL)
This function allows you to set how much the displayed is to be dimmed. � The factory default setting is �3�. 1. Press the [ADJ] button to set to the adjust mode. 2. Touch [APPEARANCE]. 3. Touch on the left of the display to select �DMR LEVEL�.
ADJ APPEARANCE
Making the LED blink when DCP is removed (BLINK LED)
You can make the LED on this unit blink when the DCP is removed. � The factory default setting is �OFF�. 1. Press the [ADJ] button to set to the adjust mode. 2. Touch [APPEARANCE]. 3. Touch on the left of the display to select �BLINK LED�.
ADJ APPEARANCE
DMR L E V E L
3
RTN
BL INK LED
OFF
RTN
4. Touch on the right of the display to set the dimmer level. � Select one of OFF (dimming OFF, bright), 1 (slightly dimmed) to 5 (dark). 5. Press the [ADJ] button to return to the original mode.
4. Touch on the right of the display to select �ON� or �OFF�. 5. Press the [ADJ] button to return to the original mode.
Adjusting the brightness of the display (BRIGHT)
You can adjust the brightness of the display to match the mounting angle of the unit. � The factory default setting is �5�. 1. Press the [ADJ] button to set to the adjust mode. 2. Touch [APPEARANCE]. 3. Touch on the left of the display to select �BRIGHT�.
ADJ APPEARANCE
Setting the beep for when buttons are operated (BEEP)
The short or long high-pitched tone you hear when a button is operated is called a �BEEP�. � The factory default setting is �ON�. 1. Press the [ADJ] button to set to the adjust mode. 2. Touch [APPEARANCE]. 3. Touch on the left of the display to select �BEEP�.
ADJ APPEARANCE
BEEP
OFF
RTN
BRIGHT
5
RTN
4. Touch on the right of the display to adjust the brightness. � This setting item can be adjusted within the range 1 to 12. Adjust this setting item while viewing how the appearance of the display changes. 5. Press the [ADJ] button to return to the original mode.
4. Touch on the right of the display to select �ON� or �OFF�. 5. Press the [ADJ] button to return to the original mode.