HITACHI DZGX20A
Instrukcja Serwisowa

Troubleshooting > Display of Error Codes and Troubleshooting

Disc Load Check Flowchart
Check the following only when an instruction for referring to this chart is given in �Table 4-4-1 Major Error Codes and Troubleshooting� on the previous page.

Caution
Laser light striking the eye may cause your eyesight to be lost: For safety, be sure to remove any power supply (AC adapter/charger, battery, etc.) from the DVD video camera/recorder before starting work.

Check the disc loaded status.

Is disc usable on the DVD video camera/ recorder loaded?
Yes

No

Load a usable disc in the DVD video camera/ recorder.

Yes

Is a single-sided disc used?
No

Is disc loaded with the No recording surface facing the optical pickup?
Yes

Load the disc with the recording surface facing the optical pickup.

Is disc properly attached to the turntable?
Yes

No

Push the disc onto the turntable until a click is heard.

Is there a foreign object in the vicinity of turntable?
No

Yes

Remove the foreign object.

Yes

Is turntable damaged?
No

Replace the disc drive unit.

Yes

Is optical pickup dirty?
No

Clean the optical pickup(*1). *1: Refer to "4-4-4 Cleaning disc and optical pickup"

Replace the disc drive unit.

Fig. 4-4-2 Disc Load Check Flowchart

4 - 21