Documentation made available quickly and It is good quality. Thanks.
Tekstowy podgląd strony 46 (kliknij aby zobaczyć)
Troubleshooting > Display of Error Codes and Troubleshooting
Disc Load Check Flowchart
Check the following only when an instruction for referring to this chart is given in �Table 4-4-1 Major Error Codes and Troubleshooting� on the previous page.
Caution
Laser light striking the eye may cause your eyesight to be lost: For safety, be sure to remove any power supply (AC adapter/charger, battery, etc.) from the DVD video camera/recorder before starting work.
Check the disc loaded status.
Is disc usable on the DVD video camera/ recorder loaded?
Yes
No
Load a usable disc in the DVD video camera/ recorder.
Yes
Is a single-sided disc used?
No
Is disc loaded with the No recording surface facing the optical pickup?
Yes
Load the disc with the recording surface facing the optical pickup.
Is disc properly attached to the turntable?
Yes
No
Push the disc onto the turntable until a click is heard.
Is there a foreign object in the vicinity of turntable?
No
Yes
Remove the foreign object.
Yes
Is turntable damaged?
No
Replace the disc drive unit.
Yes
Is optical pickup dirty?
No
Clean the optical pickup(*1). *1: Refer to "4-4-4 Cleaning disc and optical pickup"
