HITACHI DZ-GX5020A
Instrukcja Serwisowa

Troubleshooting > Messages and Troubleshooting

Message
Disc error has occurred. Finalizing is not complete.

Cause/condition for message to appear
Appears when the disc could not be �nalized because it was dirty. Appears if accident, such as power off, has occurred during �nalizing.

Troubleshooting
Refer to �4-3-5 Cleaning disc and optical pickup� and clean the disc. Or replace the disc. Set the power switch to � OFF� and reconnect the AC adapter/charger; then set the power switch to �Movie� and start �nalizing again. Or press the DISC EJECT button, reload the disc, and then execute �nalizing. Replace the disc.

Disc error has occurred. Format the disc now? YES NO

Disc error has occurred. Formatting is not complete.

If the message still appears even when the disc has been cleaned and �nalized again and again, the disc may be defective. Appears when reading or writing from/to recorded �le cannot be performed because the disc is dirty. Appears when a DVD-RAM/DVD-RW/ +RW initialized on PC, etc., or a card whose initialization was suspended before, is loaded. Appears when the disc could not be normally formatted because it was dirty.

Refer to �4-3-5 Cleaning disc and optical pickup� and clean the disc. Or replace the disc. Choose �YES� and designate it to initialize the DVD-RAM/DVD-RW/ +RW (deleting all recorded data).

Disc error has occurred. Keep disc inside & restart.

Refer to �4-3-5 Cleaning disc and optical pickup� and clean the disc. Or replace the disc. Also appears when a warped or distorted Replace the disc. disc was loaded, or a logically damaged disc whose formatting was suspended is loaded. Appears if a problem has occurred Exit the Disc Navigation function during editing of movie �le. and set the power switch to �OFF� with the disc loaded; then reconnect the AC adapter/charger and set the power switch to �Movie� or �Disc Still� (The DVD video camera/ recorder will automatically repair the video �le.)

4-6