|
|
|
Kto jest w sklepie?
Sklep przegląda 6043 gości |
|
Kategorie
|
|
Informacje
|
|
Polecamy
|
|
|
 |
|
|
Dla tego produktu nie napisano jeszcze recenzji!
 ;
Wszystko w porządku.
Instrukcja czytelna i kompletna.
Dziękuję.
all right!
thank you.
;
Bardzo dobra instrukcja. Zawiera wszystko co potrzeba, polecam!
 ;
Instrukcja jest OK. Schematy czytelne, opisane niektóre procedury.
;
Instrukcja bardzo czytelna. zawiera co potrzeba. Polecam
;
...instrukcja serwisowa w pełni czytelna i kompletna. Dziękuję!
Troubleshooting > Procedure for Removing Disc from Faulty DVD Video Camera/Recorder
4-7 Procedure for Removing Disc from Faulty DVD Video Camera/Recorder
4-7-1 Item to be checked
Connect the AC adapter/charger or charged battery (power supply), make sure that the ACCESS indicator turns off, and then press the DISC EJECT button again. Even with normal product, the disc cannot be removed while the ACCESS indicator is lit or blinking. Information: Be sure to connect the AC adapter/charger or charged battery pack (power supply) before pressing the DISC EJECT button. The DISC EJECT button will not work unless a power supply is connected.
4-7-2 How to remove disc
If the disc cannot be removed after performing �4-7-1 Item to be checked�, remove it using the procedure in this section.
Cautions
Laser light striking the eye may cause your eyesight to be lost: For safety, be sure to remove any power supply (AC adapter/charger, battery, etc.) from the DVD video camera/recorder before starting work. Information: 1) The DZ-GX20A is used for explanation in this section. Although the shapes of parts are slightly different for each model, the procedure is identical for all models. 2) Numbers in the procedural diagram are step numbers of procedure, and letters in brackets [ ] show the types of screw. 1) Remove screw [B]. 2) Remove the top cover in the direction of the arrow. 3) Use a fine-tipped flat-bladed screwdriver, etc. to move the lock slider in the direction of the arrow, and then open the disc cover. 4) After removing the disc, close the disc cover. When reassembling the removed parts, use the reverse procedure to removal.
Lock slider
3)
Accessory shoe 1) Screw [B] Top cover
2)
[B] M1.7�2.5 (Black)
Fig. 4-7-1 How to remove disc
4 - 43
|
|
|
> |
|
