|
|
|
Kategorie
|
|
Informacje
|
|
Polecamy
|
|
|
 |
|
|
Dla tego produktu nie napisano jeszcze recenzji!
 ;
Wszystko w porządku.
Instrukcja czytelna i kompletna.
Dziękuję.
all right!
thank you.
;
Bardzo dobra instrukcja. Zawiera wszystko co potrzeba, polecam!
 ;
Instrukcja jest OK. Schematy czytelne, opisane niektóre procedury.
;
Instrukcja bardzo czytelna. zawiera co potrzeba. Polecam
;
...instrukcja serwisowa w pełni czytelna i kompletna. Dziękuję!
Troubleshooting > Messages and Troubleshooting
Message
Disc includes protected scenes. Delete scenes? YES NO
Cause/condition for message to appear
Appears if the loaded disc has a program (scene) that is write-protected by the software write-protect function, which is effective in program units. Although the DVD video camera/recorder is equipped with a software disc-protect function that is effective for disc units, it does not comply with software write-protect for program units. (The DVD Forum defines two types of software protect for DVDRAM: disc units and program units.) Appears when the card contains a scene write-protected by a device other than this DVD video camera/recorder. Appears if the number of scenes on play list exceeds the upper limit (999) while control information is being added. [Refer to *1 page 4-8] Appears when reading or writing from/to recorded file cannot be performed because the disc is dirty. Appears when an unformatted DVDRAM or one initialized (other UDF2.0) on PC is loaded. Also appears if user rejects partial repair or total repair of video file.
Troubleshooting
Release the write-protect using the device that has the software writeprotect function for program units, or choose �YES� and designate it to delete the scenes.
Disc is full. Cannot add control info.
Disc is not formatted. Format the disc now? YES NO
Disc is not formatted. If it formats, it becomes possible to use for camera. However, when you record from PC connection terminal, please do not format. Format the disc now? YES NO Disc overheat. Please retry later.
Appears when a brand-new DVD-R was loaded.
Release the write-protect using the device which set it. Or choose �YES� and delete the scene. Delete any unnecessary scenes, or combine several scenes, and then operate the DVD video camera/ recorder. Refer to �4-4-4 Cleaning disc and optical pickup� and clean the disc. Or replace the disc. When initializing it (deleting all recorded data), choose �YES� and designate it. Choose �NO� and designate partial repair or total repair. When initializing it (deleting all recorded data), choose �YES� and designate it. When recording on the DVD video camera/recorder, choose �YES� and designate it. When recording video edited on PC connected via the PC connection terminal, choose �NO� and designate it.(*4)
Appears when the temperature inside the DVD video camera/recorder, or the temperature of disc, is too high, and normal operation cannot be executed.
Set the power switch to �OFF� with the disc loaded, and then leave the DVD video camera/recorder in a wellventilated place until the inside temperature decreases.
*4: The purpose of formatting DVD-R on the DVD video camera/recorder is to write to disc a program exclusively for camera recording that is necessary to record images shot by camera in real time (increasing the response from disc). When recording images that were edited using PC on DVD-R via the PC connection terminal, do not format the disc: The program used exclusively for camera recording will disable normal recording.
4 - 13
|
|
|
> |
|
