WHIRLPOOL ED20GKXXN00
Instrukcja Obsługi

i

I

Pull out to the stop, lift the front iI/l &dpullagain.

Removing and cover

the crisper,

meat drawer

Remove

the

To remove the crisper and meat drawer: 1. Slide crisper and meat drawer straight out to the stop, lift drawer, then slide out the rest of the way. 2. Replace in reverse order. To remove crisper cover: 1. Push up crisper cover glass insert from bottom, then slide out with both hands. 2. Lift front of cover frame. 3. Lift out cover frame by pulling up and out. 4. Remove metal cover support. To replace crisper cover: 1. Replace metal cover support on wall supports in front section of cabinet. 2. Fit back corners into notch supports on walls of refrigerator, then lower into place. 3. Slide back of glass insert into place, then lower front. Adjusting the meat drawer temperature Cold air flows against the meat drawer through an opening between the freezer and the refrigerator. This helps keep the meat drawer colder than the rest of the refrigerator. Slide the control to let more or less cold air through.

Use control to adjust meat drawer

temperature.

I

Removing the freezer bin For proper air movement, keep the freezer bin in place when the refrigerator is operating. To remove the bin: 1. Slide bin out to the stop. 2. Lift the front to clear the stop. 3. Slide out the rest of the way. To replace the bin: 1. Place bin on the slides. 2. Make sure the stops clear the front of the slides. 3. Slide bin in.

7