WHIRLPOOL ED25SM1LNR1
Instrukcja Obsługi

-,

Removing
l l l

freezer shelves. . .

Changing
phmce bulbs

light bulbs.. .
only

Lift front sliahtlv. Lift back 05 supports Replace in reverse order. Lift the Front Then the Back

Before removing a light shreld for cleaning or for replacing a bulb, unplug the refrigerator. Use op-

Removing

the freezer basket...
Pull on Pull Out at light bulbs behind refrigerate; and freezer control consoles: - Pull control knob straight off. - Pull bottom of control panel straight out. -Lift top of panel off supports. - Replace with a 40.watt appliance bulb. - Replace panel In reverse order. l light bulb behind ice maker: - Remove the Ice bin (see ice maker rnstructions page6). - Replace with a 40.watt appliance bulb. -Replace Ice bin Dispenser light: l - Reach the bulb through the dispenser area. - Replace with a heavy-duty IO-watt bulb.
a.<,.. **�WY-,e*,, 1 r,-..*..LY,-.a.l~-.J es.~.~.T -5

For proper air movement, keep the freezer basket In place when the refrigerator IS operatrng To remove the basket: l Slrde out to the stop Lift the front to clear l the stop Slrde out the rest l of the way

To replace the basket: % l Place basket on the slrdes l Make sure the wrre stops clear the front of theslrdes l Slide basket tn ~I. I.sEx_..r. NJ*L �.._/ �.5,..I~.~U,S, ~.a,&�,>T ? :, c** iii*e.az,_.rlL

Removing the crisper, and covers.. .
l l l l

meat pan

Removing
l

the base grille...

Open the doors

Slrde crisper and meat pan straight out to stop Lrft the front. Slide the rest of the way out Replace in reverse order. Push the lab to Clear the Cover.
l l

Pull grille outwards as shown Do not remove Tech sheet fastened behind grille.

Snap Back into Place.

l

Covers are held In place by two pegs at the back and two notched tabs In front - Press front tabs out of the way -Lift cover front. -Lift back off the pegs - Replace in reverse order

To replace: Line up grille support tabs with metal clips. l Push firmly to snap into place l Close the doors.
l