jedyne do czego mogę mieć zastrzeżenie to jakość zdjęć zawartych w przesłanej instrukcji serwisowej ponieważ są fatalnej jakości, praktycznie nieczytelne. tak poza tym jestem zadowolony to jest to czego szukałem.
Instrukcja bardzo czytelna. zawiera co potrzeba. Polecam
Tekstowy podgląd strony 15 (kliknij aby zobaczyć)
3 - SOUND - The items of the SOUND menu are not used 4 - MISCELLANEOUS - EFC031E
Factory setting Return Video Sound (Miscellaneous Field Service EFC031_X181-0 ... ... ... ... ... Factory Misc (Reset the values to ROM default LUMA_TEMPORAL-NR CHROMA_TEMPORAL-NR Calibration Debug Reset the Alignment values TT 27Y24 Packet Enable* Yes? ... ... Yes?
* According software version
4.1 Reset the values to ROM default - Reset all the EEPROM data to FF. Only required if the EEPROM data are corrupted. After �reset the values to ROM default� the alignment, calibration and channel installation is necessary. 4.2 LUMA_TEMPORAL_NR - Temporal noise reduction setting for luminance. Factory adjusted. It is not necessary to do adjustment on this item. 4.3 CHROMA_TEMPORAL_NR - Temporal noise reduction setting for chrominance. Factory adjusted. It is not necessary to do adjustment on this item. 4.4 Calibration See § 1.4 4.5 Debug - Bus quiet mode for main I2C Bus. Used only in development purpose. 4.6 Reset the Alignment values - Reset all alignment values to default value. Used only if the TV need new alignment. In that case it is necessary to start alignments by Video Calibration (ADC YPbPr). Note: After loading of a new software select � Reset the alignment values� and check the TV alignment. 4.7 TT 27Y24 Packet Enable According to software version. Factory adjust. Improve teletext performance for some special French channels
