Description of the appliance
1. Control panel 2. Operating light 3. Grease filters Standard accessories included: l Screws for mounting l Template for wall mounting l No return valve (mounted on air outlet) EFC 639 1 2 3
Mounting of grease filters
Attention! The grease filters are supplied not mounted and packed in order to avoid damages during transport of the hood. l Fit the pins of the filter on the slots of the grease filter housing, then use the handles of the filter to lock them. Dismount the filter the opposite way. l Pull the handles backwards to loosen the filter (Fig. 1).
EFC 939 1 2 3
Function
The hood may be used as follows: - Exhausting version - Recycling version Fig. 1
Exhausting version
The air is vented outdoors by a 150 mm duct which must be connected to connecting ring with no return valve on top of the motor package. The hood cannot be connected to flues of other appliances that run on energy sources other than electricity. Please, keep to the provisions of official directives regarding the question of fumes discharge.
Recycling version
The air is filtered through a carbon filter and recirculated into the room through the top sides of the chimney (Fig. 2). This version is used when there is no exhaust duct for venting outdoors or when it is impossible to install one.
