Locking/unlocking the control panel
The control panel, with the exception of the �On/Off� sensor field, can be locked at any time in order to prevent the settings being changed e.g. by wiping over the panel with a cloth. Control panel Switch on Switch off Touch Touch Display (for 5 seconds) previously set heat setting
3 When you switch the appliance off, the locking
function is automatically switched off.
Using the automatic warm-up function
All cooking zones are equpped with an automatic warm up function When setting a heat setting using , when starting from , the cooking zone switches to full power for a certain amount of time and then automatically switches back to the heat setting set.
Control panel Switch on (only when starting at Switch off Not used Touch ) Touch Touch a higher to , the
possible heat set- Display tings to to to u /u (after 5 seconds) to u to u
3 If during the automatic warm up
heat setting is selected, e.g. from automatic warm up is adjusted. not performed.
3 If there is still residualautomatic the cooking heat on zone (display ), the warm up is
The length of time that the automatic warm up function operates depends on the heat setting selected. Heat setting v 1 2 3 4 5 6 7 8 9 8 Length of the automatic warm up [min:sec] 0:30 1:00 1:40 4:50 6:30 10:10 2:00 3:30 4:30 ---
