Q Depth-of-field AE
� If you are using a zoom lens, do not zoom before the picture is taken. � If a slow shutter speed is set, use a tripod to prevent camera shake. � The <Q> mode cannot be used if the lens focus mode switch is set <MF>. The result will be the same as using the <S> mode. � The <Q> mode cannot be used if you use flash or remote control. The result will be the same as using the <S> mode with flash. � If you are using the <Q> mode with a lens that has a focus-limiting switch, set the switch to �minimum focusing distance - �.� � To cancel <Q> at any time, turn the Mode Dial to any setting except <Q>. � To check the depth of field while using depth-of-field AE, set DEP points 1 and 2 and press the shutter button halfway. Then press the depth-of-field preview button. � To further increase the depth of field, use a wide-angle lens. � Setting DEP points 1 and 2 at the same point on the subject will make the depth of field shallow. The foreground and background will then be blurred, making the subject stand out. Using a telephoto lens enhances this effect.
