CLARION EN-1174N-C
Instrukcja Serwisowa

5. Cautions regarding chips. Do not reuse removed chips even when no abnormality is observed in their appearance. Always replace them with new ones. (The chip parts include resistors, capacitors, diodes, transistors, etc). The negative pole of tantalum capacitors is highly susceptible to heat, so use special care when replacing them and check the operation afterwards.

6. Cautions in handling flexible PWB Before working with a soldering iron, make sure that the iron tip temperature is around 270�. Take care not to apply the iron tip repeatedly(more than three times)to the same patterns. Also take care not to apply the tip with force. 7. Turn the unit OFF during disassembly and parts replacement. Recheck all work before you apply power to the unit.

�EXPLODED VIEW�PARTS LIST
7 5

17 15 5 8 14 13 12 11 10 4 9 16

5

6 5 3 2

1
NO. 1 2 3 4 5 6 7 8 PART NO. 300-7887-00 716-1561-00 300-7852-00 855-1448-00 714-2605-81 311-1816-01 310-1726-00 286-9023-47 286-9023-55 286-9023-67 DESCRIPTION MTG BRACKET only N-C IT SCREW MTG BRACKET without N-C DIN CORD MACHINE SCREW LOWER CASE UPPER CASE SET PLATE for N-A SET PLATE for N-B SET PLATE for N-C Q'TY 1 2 1 1 6 1 1 1 10 11 12 13 14 15 16 17 074-0850-06 074-1218-00 009-0621-07 076-0312-08 074-0850-08 714-2605-81 331-3085-00 331-2634-00 NO. 9 PART NO. 039-1777-00 DESCRIPTION MAIN PWB (WITHOUT COMPOMENTS) OUTLET SOCKET OUTLET SOCKET CHOKE PLUG OUTLET SOCKET MACHINE SCREW CONNECTOR HOLDER HOLDER Q'TY 1 1 1 1 1 1 1 1 1

EN-1174N-A/B/C

-2-