The Safety Thermostat
This oven is provided with a safety thermostat. In case of malfunctioning of the main thermostat, and consequent over-heating, the safety device will stop the power supply to the appliance. If this happens, call your local Service Centre. Under no circumstances should you attempt to repair the appliance yourself.
Cooling fan
The purpose of the fan is to cool the control panel, the knobs and the oven door handle. The air stream flows out between the control panel and the oven door handle. To ensure proper cooling, the fan will continue to operate even after the oven is turned off, until normal temperature levels have been reached.
Electronic Timer
Program On Light
A U T O
Automatic Operation Light
-+
A button: Minute Minder Acoustic Signal Off B button: Cooking Time
ABCDE
KNOB (E) D button: Manual Operation
C button: End of Cooking
Setting the time of day (24 h clock)
Press buttons A and B at the same time and while turning knob E enter the time of
-+
Cooking time
day.
Manual operation
To set oven for manual operation, press button D.
-+
Press button B and while turning knob E enter the required time. The "AUTO" signal will appear on the right hand side -+ of the clock. Then, select the required temperature and the oven function. When cooking is completed, an audible signal will be heard for approximately 2 minutes. To cancel press button A and return control and thermostat knobs to the OFF position.
A U T O
Setting the automatic timer
Press button B and while turning knob E enter the required cooking time. Then press button C and while turning knob E enter the end of cooking time. Turn the thermostat and function control knobs to the required settings. The oven temperature light nor oven light will not come on until the oven switches on. When cooking is completed, the "AUTO" signal will flash an audible signal will be heard for approximately 2 minutes. To cancel press button A and return control and thermostat knobs to the OFF position.
A U T O
Setting the minute minder
Press button A and while turning knob E enter the required time (maximum 23 h 59 min.) After required time has been selected the clock will revert to the time of day. When time is up an audible signal will be heard for approximately 2 minutes. To cancel press button A and return control and thermostat knobs to the OFF position.
-+
-+
A U T O
-+
i
In case of loss of power, all the settings (time of day, setted programs or programs in operation) will be cancelled. When the power is restored, the numbers on the display will flash, and the timer has to be reset.
