Turn the main oven temperature control to the required setting. The oven light will illuminate.
THINGS TO NOTE
The indicator neon will glow. It may turn ON and OFF during use to show that the setting is being maintained. The cooling fan for the controls may operate after a time. The oven fan will operate. If an automatic programme has been set, the oven fan and light do not come on until cooking begins.
TO FIT THE MAIN OVEN SHELVES
The shelves should be fitted with the straight rods uppermost on the frame and the forms towards the back of the oven. To remove a shelf slide the shelf towards you until the shelf stop is reached. Tilt shelf up at the front so that the stops clear the side supports. Lift shelf clear. To install a shelf, reverse the above steps. Each shelf position has an upper and lower support wire, ensure the shelf is placed between these two support wires.