Gruba instrukcja - poprostu wszystko co potrzreba - polecam .
Tekstowy podgląd strony 11 (kliknij aby zobaczyć)
ASSEMBLY
Attaching the Armrests (On Both Right and Left Sides)
Use the mark as a guide for insertion.
1. Insert the armrest into the unit.
� Markings indicating left-hand and right-hand sides can be found on the inside surface of each armrest. � Make sure the control panel cord does not become pinched when fitting the right armrest onto the unit.
1
Turn screws clockwise to tighten.
2. Fasten the armrest with the attachment screws.
� Set the three attachment screws in place first and then tighten them firmly.
2
Use This Screw #6 Allen Key Attachment Screw (M6#16)
Connecting the Air Plugs (On Both Right and Left Sides)
1. Insert the air plug.
� Push on the air plug until you hear it click into place.
1 2
Allen Key Air Plug Attachment Screw (M5#16) Plug Cover
2. Place the plug cover over top of the air plug and fasten with the screw.
Use This Screw
#2
Attaching the Control Panel Stand to the Right or Left Armrest
Attachment Screw (M6#10) Allen Key
1. Decide which side to attach the control panel stand to. 2. Fasten the control panel stand with the attachment screws in four places.
� Set the four attachment screws in place first and then tighten them firmly.
