Gruba instrukcja - poprostu wszystko co potrzreba - polecam .
Tekstowy podgląd strony 9 (kliknij aby zobaczyć)
Building the appliance in under a worktop
This appliance can also be built in under the worktop of your kitchen unite. To do this, proceed as follows: 1. remove screws which secure the top to the rear brackets; 2. move the top slightly to release it from the retainers and remove it; 3. unscrew the screws securing the rear feet to the cabinet; 4. remove the 3 mm shim from the feet and refit them; screw in the front feet to obtain the required height. Note Hole provided in the top hinges enable the appliance to be secured to the kitchen worktop by means of two screws. Important For the appliance to function properly, an opening of at least 137 cm2 must be cut in the kitchen worktop (see fig.).
A minimum clearance must also be provided between the,condenser and the wall, as shown in the figure.
